News News
Product center / Products
Contact us

Tel: 86 021-57360069

Fax: 86 021-57200778

Mobile: 13916306473 Aaron Du

China · Shanghai

Address:No.1285,Jinshi North Road,Jinshan District,Shanghai, China

The future development of cold-formed equipment industry (on)

Date: 2017-03-24
Views: 7

       Domestic cold-formed equipment industry's huge development, not only reflected in the continuous expansion of production scale, the increasing number of production, application areas of the in-depth expansion, but also reflected in the following aspects. We Tianfeng cold bending equipment factory in the long-term exploration, with our own technical team, with a good attitude to the majority of consumers get the recognition.

       First, the level of technical equipment to improve

       In recent years, the domestic cold-bending equipment industry, the level of continuous improvement of technology and equipment, the combination of their own factories, through independent research or development or the introduction of foreign advanced equipment, so that the level of their equipment continues to rise, continuous improvement of production technology, technical capabilities continue to improve , To promote the development of a number of high-speed rolling mill, large-scale, efficiency, intensive is being carried out gradually, and thus achieve the goal of high-quality production of high-quality products. Note: The current cold-formed steel accounted for 1.8% of the total steel, 5 years after the 2.2%, the average annual growth rate of 13%.

       Second, the establishment of industry research platform

       The domestic cold-formed equipment industry's huge development, the urgent need for cold-bending equipment, steel-based theory to strengthen research to adapt to the continuous development of production practice, and provide theoretical guidance for the production practice. In this situation, some of the outstanding domestic enterprises have focused on the advantages of enterprise resources, set out to set up their own research platform, the use of their own experience, focusing on strengthening the cold-formed equipment molding research and special-shaped cross-section steel research and development, in order to Market competition to obtain a leading edge.


News More>
1
2017 - 03 - 22
1 micron machining method. Precision machining is done under tightly controlled environmental conditions using precision machine tools and precision gauges and gauges. Processing accuracy to achieve and more than 0.1 micron ultra-precision machining. In the aerospace industry, precision machining is mainly used for machining precision mechanical parts in aircraft control equipment, such as precision fittings in hydraulic and pneumatic servos, gyroscope frames, housings, flotation, liquid-filled bearing assemblies and Floats and so on. The precision parts of the aircraft are complex, the rigidi...
2
2017 - 03 - 22
Hollow shaft is more and more people to use, then let's talk about what the advantages of what you loved by everyoneHollow shaft occupies a relatively large volume of space, but can reduce the weight. According to the mechanical analysis of materials, in the shaft transmission torque, from the radial section to see, the more the place outside the effective torque transmission effect. In the shaft need to pass a larger torque, you need a thick shaft diameter. And because the role of the torque in the axial parts of the smaller, so the general use of hollow to reduce the weight of the shaft.
3
2017 - 03 - 22
The wire must be considered for oxidation, in order to prevent the formation of plastic deformation is not uniform to avoid failure in the course of the operationAs the protective gas oxidation increases, the amount of deoxidized elements (such as silicon, manganese, titanium, etc.) in the wire increases correspondingly, and the strength of the weld metal is reduced. When the deoxidation element in the wire contains the most insufficient, causing the weld toughness to decline, but also may lead to welding defects (such as pores, etc.) generation.Welding hot-rolled steel, normalizing steel and ...
4
2017 - 03 - 24
With the economic development, more and more families to buy a car, in order to car safety, have a good garage door, is expected by most families, then the garage door equipment produced by the garage door which is divided into several , That kind of better? Let Xiaobian to tell you:Electric (copper) garage doorAluminum alloy solid wood structure of the garage door, due to the characteristics of wood by climate and other environmental impact, cracking is inevitable. Although it can be dried by drying, paint and other processes to reduce cracking, but can not be completely avoided. The copper g...
5
2017 - 03 - 24
Integrated wall equipment is the production of integrated wall of the main equipment for the decoration industry is very important, generally integrated wall of the advanced production technology, equipment, low loss, the production of integrated wall yield is also high. With integrated wall equipment to produce integrated wall with no radiation, no formaldehyde production, fire, water, moisture, no smell, easy to scrub, super hardness, fashion bright, easy installation and so on many excellent features.Sang flash is your choice to buy integrated wall equipment, Shanghai Sang flash Machinery C...
6
2017 - 03 - 24
Integrated wall equipmentProduction of integrated wall equipment is called integrated wall equipment, for the decoration industry is very important, generally integrated wall of the advanced production technology, equipment loss is low, the production of integrated wall yield is also high. With integrated wall equipment to produce integrated wall with no radiation, no formaldehyde production, fire, water, moisture, no smell, easy to scrub, super hardness, fashion bright, easy installation and so on many excellent features.Cold bending equipmentCold bending equipment is a kind of including shel...

Tell me your needs, we will contact you the first time!

Address:No.609,Jinzhang Highway,Jinshan District,Shanghai, China   Tel: 86 021-57360069
Copyright ©2017 - 2020 Shanghai Sunshine Machine Co.,Ltd
犀牛云提供企业云服务